Release valve: Both flexible and rigid in tension gas springs can be supplied with a release valve, which allows the installer to reduce the force. This release valve also allows IGS to easily and economically recharge the gas spring should too much gas be released.
A locking gas spring incorporates a mechanism to enable the rod to be locked at any point in its travel. When this plunger is depressed the rod is free to operate as normal. This mechanism is actuated by a plunger that protrudes from the rod.When the plunger is released, which may be at any point in the stroke, the rod is locked in that position. IGS offers three types of locking gas springs, which have the following characteristics when locked:
| Rigid in tension | Rigid when rod is being pulled, high resistance to rod being pushed |
| Flexible | Good resistance to rod being pushed of pulled |
| Rigid in compression | High resistance to rod being pulled, rigid when rod is being pushed |
All three types of lockable gas springs have the same locking mechanism. When the plunger rod is released the valve closes and the passage of oil or gas is prevented, locking the piston in that position.This locking mechanism operates when the plunger rod is depressed by opening a valve in the piston.
