Tension Gas Springs

Shuangyuan produce a complete range of tension gas springs. Sometimes referred to as traction springs, these units operate the opposite of compression gas springs. They retract rather than extend. Mounting constraints often do not allow for the use of compression springs. Examples include doors and access panels hinged horizontally at the bottom and any type of cover or lid that must be pulled open or pulled shut. Tension gas springs also find many uses as tensioners on mechanical assemblies and belt drives. In order to accommodate a wide range of force and stroke requirements, Shuangyuan offers these units in mild steel in a number of sizes.

Size

Stroke Range

Force Range

K-Factor

Extended Length

Materials

6/15

30–300 mm

100-600 N

1.55

2*Stroke+85mm

Steel/Stainless

8/18

30–400 mm

200-1000 N

1.60

2*Stroke+85mm

Steel/Stainless

10/22

30–500 mm

300-1500 N

1.60

2*Stroke+100mm

Steel/Stainless

14/28

50–500 mm

500-2500 N

1.70

2*Stroke+100mm

Steel/Stainless

The column headed Size refers to the rod and body diameters

To calculate the approximate pulled out (extended length) without fittings, use the formulas in the extended length column above.

Tension Gas Springs

Please contact Shuangyuan to discuss your specific requirements.

Tension Gas Springs,traction gas springs

Xiamen Shuangyuan Springs Co., Ltd copy right @2006-2008
Address: Defenghang Industrial Zone, Dongfu Town, Haicang District , Xiamen Fujian, P.R.China
Tel: +86(592)5254186 +86(592)5289710 Fax: +86(592)5513310
Email: shuangyuan@springinchina.com  rosecn888@gmail.com